Added to scope of October 2018 NADCAP Audit

Anodize - Sulphuric : MIL-A-8625 Anodize - Hard : MIL-A-8625 Anodize - Thin Sulphuric : Other

Cadmium Plating : AMS-2400, AMS-QQ-P-416, QQ-P-416 Zinc-Nickel Plating : AMS2417 Silver Plating : FED–QQ–S–365 Tin Plating : ASTM B545, MIL–T–10727

Chemical Conversion : MIL-C-5541, MIL-DTL-5541 Passivation : AMS-2700, AMS-QQ-P-35, QQ-P-35 Manganese Phosphate : MIL-DTL-16232

Painting (Primer & Top Coat) : MIL–C–22750, MIL–C–85285, MIL–PRF–22750, MIL–PRF–23377, MIL–PRF–85285, MIL–PRF–85582, MIL–P–23377, MIL–P–85582 Dry Film Lubricant : MIL-L-46010, MIL-PRF-46010

Stress Relief : AC7108 - Ovens used at a Set Point Above 250°F, Ovens used at a Set Point of 250°F or Below Embrittlement Relief : AC7108 - Ovens used at a Set Point Above 250°F, Ovens used at a Set Point of 250°F or Below

Laboratory : B05 – Salt Spray Testing, B06 – Water Immersion / Humidity, B09 – Taber Wear Testing, B10 – Adhesion Testing (Adhesion Tape Testing), B12 – Adhesion Testing (Bend Test), B13 – Coating Weight Testing, B14 – Conductivity Testing, B16 – Coating Thickness Measurement, B21 – Other Testing, Solution Analysis. Quality System : AS9100/ISO9001, NCA3800, N299.3, NADCAPAC7108